20 Apr 2020

Beacon Frame from Meraki MR56 8 x 8:8 UL/DL MU-Mimo and OFDMA Access Point

Frame 7: 431 bytes on wire (3448 bits), 431 bytes captured (3448 bits)
Encapsulation type: IEEE 802.11 plus radiotap radio header (23)
Arrival Time: Apr 20, 2020 22:18:56.538000000 AUS Eastern Standard Time
[Time shift for this packet: 0.000000000 seconds]
Epoch Time: 1587385136.538000000 seconds
[Time delta from previous captured frame: 0.532000000 seconds]
[Time delta from previous displayed frame: 0.532000000 seconds]
[Time since reference or first frame: 0.532000000 seconds]
Frame Number: 7
Frame Length: 431 bytes (3448 bits)
Capture Length: 431 bytes (3448 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: radiotap:wlan_radio:wlan]
Radiotap Header v0, Length 24
Header revision: 0
Header pad: 0
Header length: 24
Present flags
Present flags word: 0x0000006f
.... .... .... .... .... .... .... ...1 = TSFT: Present
.... .... .... .... .... .... .... ..1. = Flags: Present
.... .... .... .... .... .... .... .1.. = Rate: Present
.... .... .... .... .... .... .... 1... = Channel: Present
.... .... .... .... .... .... ...0 .... = FHSS: Absent
.... .... .... .... .... .... ..1. .... = dBm Antenna Signal: Present
.... .... .... .... .... .... .1.. .... = dBm Antenna Noise: Present
.... .... .... .... .... .... 0... .... = Lock Quality: Absent
.... .... .... .... .... ...0 .... .... = TX Attenuation: Absent
.... .... .... .... .... ..0. .... .... = dB TX Attenuation: Absent
.... .... .... .... .... .0.. .... .... = dBm TX Power: Absent
.... .... .... .... .... 0... .... .... = Antenna: Absent
.... .... .... .... ...0 .... .... .... = dB Antenna Signal: Absent
.... .... .... .... ..0. .... .... .... = dB Antenna Noise: Absent
.... .... .... .... .0.. .... .... .... = RX flags: Absent
.... .... .... .0.. .... .... .... .... = Channel+: Absent
.... .... .... 0... .... .... .... .... = MCS information: Absent
.... .... ...0 .... .... .... .... .... = A-MPDU Status: Absent
.... .... ..0. .... .... .... .... .... = VHT information: Absent
.... .... .0.. .... .... .... .... .... = frame timestamp: Absent
.... .... 0... .... .... .... .... .... = HE information: Absent
.... ...0 .... .... .... .... .... .... = HE-MU information: Absent
.... .0.. .... .... .... .... .... .... = 0 Length PSDU: Absent
.... 0... .... .... .... .... .... .... = L-SIG: Absent
...0 .... .... .... .... .... .... .... = Reserved: 0x0
..0. .... .... .... .... .... .... .... = Radiotap NS next: False
.0.. .... .... .... .... .... .... .... = Vendor NS next: False
0... .... .... .... .... .... .... .... = Ext: Absent
MAC timestamp: 2310693992633136
Flags: 0x00
.... ...0 = CFP: False
.... ..0. = Preamble: Long
.... .0.. = WEP: False
.... 0... = Fragmentation: False
...0 .... = FCS at end: False
..0. .... = Data Pad: False
.0.. .... = Bad FCS: False
0... .... = Short GI: False
Data Rate: 6.0 Mb/s
Channel frequency: 5540 [A 108]
Channel flags: 0x0140, Orthogonal Frequency-Division Multiplexing (OFDM), 5 GHz spectrum
.... .... ...0 .... = Turbo: False
.... .... ..0. .... = Complementary Code Keying (CCK): False
.... .... .1.. .... = Orthogonal Frequency-Division Multiplexing (OFDM): True
.... .... 0... .... = 2 GHz spectrum: False
.... ...1 .... .... = 5 GHz spectrum: True
.... ..0. .... .... = Passive: False
.... .0.. .... .... = Dynamic CCK-OFDM: False
.... 0... .... .... = Gaussian Frequency Shift Keying (GFSK): False
...0 .... .... .... = GSM (900MHz): False
..0. .... .... .... = Static Turbo: False
.0.. .... .... .... = Half Rate Channel (10MHz Channel Width): False
0... .... .... .... = Quarter Rate Channel (5MHz Channel Width): False
Antenna signal: -36dBm
Antenna noise: -92dBm
802.11 radio information
PHY type: 802.11a (OFDM) (5)
Turbo type: Non-turbo (0)
Data rate: 6.0 Mb/s
Channel: 108
Frequency: 5540MHz
Signal strength (dBm): -36dBm
Noise level (dBm): -92dBm
Signal/noise ratio (dB): 56dB
TSF timestamp: 2310693992633136
[Duration: 568µs]
IEEE 802.11 Beacon frame, Flags: ........
Type/Subtype: Beacon frame (0x0008)
Frame Control Field: 0x8000
.... ..00 = Version: 0
.... 00.. = Type: Management frame (0)
1000 .... = Subtype: 8
Flags: 0x00
.... ..00 = DS status: Not leaving DS or network is operating in AD-HOC mode (To DS: 0 From DS: 0) (0x0)
.... .0.. = More Fragments: This is the last fragment
.... 0... = Retry: Frame is not being retransmitted
...0 .... = PWR MGT: STA will stay up
..0. .... = More Data: No data buffered
.0.. .... = Protected flag: Data is not protected
0... .... = Order flag: Not strictly ordered
.000 0000 0000 0000 = Duration: 0 microseconds
Receiver address: Broadcast (ff:ff:ff:ff:ff:ff)
Destination address: Broadcast (ff:ff:ff:ff:ff:ff)
Transmitter address: 9a:18:98:fb:9d:db (9a:18:98:fb:9d:db)
Source address: 9a:18:98:fb:9d:db (9a:18:98:fb:9d:db)
BSS Id: 9a:18:98:fb:9d:db (9a:18:98:fb:9d:db)
.... .... .... 0000 = Fragment number: 0
0000 0000 0000 .... = Sequence number: 0
IEEE 802.11 Wireless Management
Fixed parameters (12 bytes)
Timestamp: 2310693992633136
Beacon Interval: 0.102400 [Seconds]
Capabilities Information: 0x1511
Tagged parameters (371 bytes)
Tag: SSID parameter set: Meraki
Tag Number: SSID parameter set (0)
Tag length: 6
SSID: Meraki
Tag: Supported Rates 12(B), 18, 24(B), 36, 48, 54, [Mbit/sec]
Tag Number: Supported Rates (1)
Tag length: 6
Supported Rates: 12(B) (0x98)
Supported Rates: 18 (0x24)
Supported Rates: 24(B) (0xb0)
Supported Rates: 36 (0x48)
Supported Rates: 48 (0x60)
Supported Rates: 54 (0x6c)
Tag: DS Parameter set: Current Channel: 108
Tag Number: DS Parameter set (3)
Tag length: 1
Current Channel: 108
Tag: Traffic Indication Map (TIM): DTIM 0 of 0 bitmap
Tag: Country Information: Country Code AU, Environment Any
Tag: Power Constraint: 3
Tag: TPC Report Transmit Power: 19, Link Margin: 0
Tag Number: TPC Report (35)
Tag length: 2
Transmit Power: 19
Link Margin: 0
Tag: QBSS Load Element 802.11e CCA Version
Tag: AP Channel Report: Operating Class 5, Channel List : 36, 149,
Tag: RM Enabled Capabilities (5 octets)
Tag: HT Capabilities (802.11n D1.10)
Tag: HT Information (802.11n D1.10)
Tag: Extended Capabilities (8 octets)
Tag Number: Extended Capabilities (127)
Tag length: 8
Extended Capabilities: 0x04 (octet 1)
.... ...0 = 20/40 BSS Coexistence Management Support: Not supported
.... ..0. = Reserved (was On-demand beacon): 0x0
.... .1.. = Extended Channel Switching: Supported
.... 0... = Reserved (was WAVE indication): 0x0
...0 .... = PSMP Capability: Not supported
..0. .... = Reserved: 0x0
.0.. .... = S-PSMP Support: Not supported
0... .... = Event: Not supported
Extended Capabilities: 0x10 (octet 2)
.... ...0 = Diagnostics: Not supported
.... ..0. = Multicast Diagnostics: Not supported
.... .0.. = Location Tracking: Not supported
.... 0... = FMS: Not supported
...1 .... = Proxy ARP Service: Supported
..0. .... = Collocated Interference Reporting: Not supported
.0.. .... = Civic Location: Not supported
0... .... = Geospatial Location: Not supported
Extended Capabilities: 0x0f (octet 3)
.... ...1 = TFS: Supported
.... ..1. = WNM Sleep Mode: Supported
.... .1.. = TIM Broadcast: Supported
.... 1... = BSS Transition: Supported
...0 .... = QoS Traffic Capability: Not supported
..0. .... = AC Station Count: Not supported
.0.. .... = Multiple BSSID: Not supported
0... .... = Timing Measurement: Not supported
Extended Capabilities: 0x06 (octet 4)
.... ...0 = Channel Usage: Not supported
.... ..1. = SSID List: Supported
.... .1.. = DMS: Supported
.... 0... = UTC TSF Offset: Not supported
...0 .... = TPU Buffer STA Support: Not supported
..0. .... = TDLS Peer PSM Support: Not supported
.0.. .... = TDLS channel switching: Not supported
0... .... = Interworking: Not supported
Extended Capabilities: 0x00 (octet 5)
.... ...0 = QoS Map: Not supported
.... ..0. = EBR: Not supported
.... .0.. = SSPN Interface: Not supported
.... 0... = Reserved: 0x0
...0 .... = MSGCF Capability: Not supported
..0. .... = TDLS Support: Not supported
.0.. .... = TDLS Prohibited: Not supported
0... .... = TDLS Channel Switching Prohibited: Not supported
Extended Capabilities: 0x00 (octet 6)
.... ...0 = Reject Unadmitted Frame: Not supported
.... 000. = Service Interval Granularity: 5 ms (0)
...0 .... = Identifier Location: Not supported
..0. .... = U-APSD Coexistence: Not supported
.0.. .... = WNM Notification: Not supported
0... .... = QAB Capability: 0x0
Extended Capabilities: 0x00 (octet 7)
.... ...0 = UTF-8 SSID: Not supported
.... ..0. = QMF Activated: False
.... .0.. = QMF Reconfiguration Activated: False
.... 0... = Robust AV Streaming: False
...0 .... = Advanced GCR: False
..0. .... = Mesh GCR: False
.0.. .... = SCS: False
0... .... = QLoad Report: False
Extended Capabilities: 0x40 (octet 8)
.... ...0 = Alternate EDCA: False
.... ..0. = Unprotected TXOP Negotiation: False
.... .0.. = Protected TXOP Negotiation: False
.... 0... = Reserved: 0x0
...0 .... = Protected QLoad Report: False
..0. .... = TDLS Wider Bandwidth: Not supported
.1.. .... = Operating Mode Notification: Supported
0... .... = Max Number Of MSDUs In A-MSDU: 0
Tag: VHT Capabilities
Tag Number: VHT Capabilities (191)
Tag length: 12
VHT Capabilities Info: 0x338ff9f2
.... .... .... .... .... .... .... ..10 = Maximum MPDU Length: 11 454 (0x2)
.... .... .... .... .... .... .... 00.. = Supported Channel Width Set: Neither 160MHz nor 80+80 supported (0x0)
.... .... .... .... .... .... ...1 .... = Rx LDPC: Supported
.... .... .... .... .... .... ..1. .... = Short GI for 80MHz/TVHT_MODE_4C: Supported
.... .... .... .... .... .... .1.. .... = Short GI for 160MHz and 80+80MHz: Supported
.... .... .... .... .... .... 1... .... = Tx STBC: Supported
.... .... .... .... .... .001 .... .... = Rx STBC: 1 Spatial Stream Supported (0x1)
.... .... .... .... .... 1... .... .... = SU Beamformer Capable: Supported
.... .... .... .... ...1 .... .... .... = SU Beamformee Capable: Supported
.... .... .... .... 111. .... .... .... = Beamformee STS Capability: 8 (0x7)
.... .... .... .111 .... .... .... .... = Number of Sounding Dimensions: 8 (0x7)
.... .... .... 1... .... .... .... .... = MU Beamformer Capable: Supported
.... .... ...0 .... .... .... .... .... = MU Beamformee Capable: Not supported
.... .... ..0. .... .... .... .... .... = TXOP PS: Not supported
.... .... .0.. .... .... .... .... .... = +HTC-VHT Capable: Not supported
.... ..11 1... .... .... .... .... .... = Max A-MPDU Length Exponent: 1 048 575 (0x7)
.... 00.. .... .... .... .... .... .... = VHT Link Adaptation: No Feedback (0x0)
...1 .... .... .... .... .... .... .... = Rx Antenna Pattern Consistency: Supported
..1. .... .... .... .... .... .... .... = Tx Antenna Pattern Consistency: Supported
00.. .... .... .... .... .... .... .... = Extended NSS BW Support: 0x0
VHT Supported MCS Set
Rx MCS Map: 0xaaaa
...0 0000 0000 0000 = Rx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000
000. .... .... .... = MaX NSTS Total: 0
Tx MCS Map: 0xaaaa
...0 0000 0000 0000 = Tx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000
..1. .... .... .... = Extended NSS BW Capable: Capable
00.. .... .... .... = Reserved: 0x0
Tag: VHT Operation
Tag Number: VHT Operation (192)
Tag length: 5
VHT Operation Info
Channel Width: 80 MHz (0x01)
Channel Center Segment 0: 106
Channel Center Segment 1: 0
Basic MCS Map: 0xfffc
.... .... .... ..00 = Basic 1 SS: MCS 0-7 (0x0)
.... .... .... 11.. = Basic 2 SS: Not Supported (0x3)
.... .... ..11 .... = Basic 3 SS: Not Supported (0x3)
.... .... 11.. .... = Basic 4 SS: Not Supported (0x3)
.... ..11 .... .... = Basic 5 SS: Not Supported (0x3)
.... 11.. .... .... = Basic 6 SS: Not Supported (0x3)
..11 .... .... .... = Basic 7 SS: Not Supported (0x3)
11.. .... .... .... = Basic 8 SS: Not Supported (0x3)
Tag: VHT Tx Power Envelope
Tag Number: VHT Tx Power Envelope (195)
Tag length: 5
Tx Pwr Info: 0x03
.... .011 = Max Tx Pwr Count: 3
..00 0... = Max Tx Pwr Unit Interpretation: EIRP (0)
00.. .... = Reserved: 0
Local Max Tx Pwr Constraint 20MHz: 24.0 dBm
Local Max Tx Pwr Constraint 40MHz: 24.0 dBm
Local Max Tx Pwr Constraint 80MHz: 24.0 dBm
Local Max Tx Pwr Constraint 160MHz/80+80 MHz: 24.0 dBm
Ext Tag: HE Capabilities (IEEE Std 802.11ax/D3.0)
Tag Number: Element ID Extension (255)
Ext Tag length: 46
Ext Tag Number: HE Capabilities (IEEE Std 802.11ax/D3.0) (35)
HE MAC Capabilities Information: 0x00401a08010d
.... .... .... .... .... .... .... .... .... .... .... ...1 = +HTC HE Support: Supported
.... .... .... .... .... .... .... .... .... .... .... ..0. = TWT Requester Support: Not supported
.... .... .... .... .... .... .... .... .... .... .... .1.. = TWT Responder Support: Supported
.... .... .... .... .... .... .... .... .... .... ...0 1... = Fragmentation Support: Support for dynamic fragments in MPDUs or S-MPDUs (1)
.... .... .... .... .... .... .... .... .... .... 000. .... = Maximum Number of Fragmented MSDUs: 1
.... .... .... .... .... .... .... .... .... ..01 .... .... = Minimum Fragment Size: Minimum payload size of 128 bytes (1)
.... .... .... .... .... .... .... .... .... 00.. .... .... = Trigger Frame MAC Padding Duration: 0
.... .... .... .... .... .... .... .... .000 .... .... .... = Multi-TID Aggregation Support: 0
.... .... .... .... .... .... .... ...0 0... .... .... .... = HE Link Adaptation Support: No feedback if the STA does not provide HE MFB (0)
.... .... .... .... .... .... .... ..0. .... .... .... .... = All Ack Support: Not supported
.... .... .... .... .... .... .... .0.. .... .... .... .... = TRS Support: Not supported
.... .... .... .... .... .... .... 1... .... .... .... .... = BSR Support: Supported
.... .... .... .... .... .... ...0 .... .... .... .... .... = Broadcast TWT Support: Not supported
.... .... .... .... .... .... ..0. .... .... .... .... .... = 32-bit BA Bitmap Support: Not supported
.... .... .... .... .... .... .0.. .... .... .... .... .... = MU Cascading Support: Not supported
.... .... .... .... .... .... 0... .... .... .... .... .... = Ack-Enabled Aggregation Support: Not supported
.... .... .... .... .... ...0 .... .... .... .... .... .... = Reserved: 0x0
.... .... .... .... .... ..1. .... .... .... .... .... .... = OM Control Support: Supported
.... .... .... .... .... .0.. .... .... .... .... .... .... = OFDMA RA Support: Not supported
.... .... .... .... ...1 1... .... .... .... .... .... .... = Maximum A-MPDU Length Exponent Extension: 3
.... .... .... .... ..0. .... .... .... .... .... .... .... = A-MSDU Fragmentation Support: Not supported
.... .... .... .... .0.. .... .... .... .... .... .... .... = Flexible TWT Schedule Support: Not supported
.... .... .... .... 0... .... .... .... .... .... .... .... = Rx Control Frame to MultiBSS: Not supported
.... .... .... ...0 .... .... .... .... .... .... .... .... = BSRP BQRP A-MPDU Aggregation: Not supported
.... .... .... ..0. .... .... .... .... .... .... .... .... = QTP Support: Not supported
.... .... .... .0.. .... .... .... .... .... .... .... .... = BQR Support: Not supported
.... .... .... 0... .... .... .... .... .... .... .... .... = SRP Responder Role: Not supported
.... .... ...0 .... .... .... .... .... .... .... .... .... = NDP Feedback Report Support: Not supported
.... .... ..0. .... .... .... .... .... .... .... .... .... = OPS Support: Not supported
.... .... .1.. .... .... .... .... .... .... .... .... .... = A-MSDU in A-MPDU Support: Supported
.... ..00 0... .... .... .... .... .... .... .... .... .... = Multi-TID Aggregation TX Support: 0
.... .0.. .... .... .... .... .... .... .... .... .... .... = HE Subchannel Selective Transmission Support: Not supported
.... 0... .... .... .... .... .... .... .... .... .... .... = UL 2x996-tone RU Support: Not supported
...0 .... .... .... .... .... .... .... .... .... .... .... = OM Control UL MU Data Disable RX Support: Not supported
..0. .... .... .... .... .... .... .... .... .... .... .... = HE Dynamic SM Power Save: Not supported
.0.. .... .... .... .... .... .... .... .... .... .... .... = Punctured Sounding Support: Not supported
0... .... .... .... .... .... .... .... .... .... .... .... = HT And VHT Trigger Frame RX Support: Not supported
HE Phy Capabilities Information
.... ...0 = Reserved: 0x0
0000 010. = Channel Width Set: 0x02
Bits 8 to 23: 0x4c60
Bits 24 to 39: 0x7f89
Bits 40 to 55: 0x83c7
Bits 56 to 71: 0x019c
Bits 72 to 87: 0x0008
Supported HE-MCS and NSS Set
Rx and Tx MCS Maps <= 80 MHz
PPE Thresholds
.... .111 = NSS: 7
.111 1... = RU Index Bitmask: 0xf
NSS 0
NSS 1
NSS 2
NSS 3
NSS 4
NSS 5
NSS 6
NSS 7
Ext Tag: HE Operation (IEEE Std 802.11ax/D3.0)
Tag Number: Element ID Extension (255)
Ext Tag length: 6
Ext Tag Number: HE Operation (IEEE Std 802.11ax/D3.0) (36)
HE Operation Parameters: 0x003ff4
.... .... .... .... .... .100 = Default PE Duration: 4
.... .... .... .... .... 0... = TWT Required: Not required
.... .... ..11 1111 1111 .... = TXOP Duration RTS Threshold: 1023
.... .... .0.. .... .... .... = VHT Operation Information Present: False
.... .... 0... .... .... .... = Co-Located BSS: False
.... ...0 .... .... .... .... = ER SU Disable: False
0000 000. .... .... .... .... = Reserved: 0x00
BSS Color Information: 0x0c
..00 1100 = BSS Color: 0x0c
.0.. .... = Partial BSS Color: False
0... .... = BSS Color Disabled: False
Basic HE-MCS and NSS Set: 0xfffc
.... .... .... ..00 = Max HE-MCS for 1 SS: Support for HE-MCS 0-7 (0)
.... .... .... 11.. = Max HE-MCS for 2 SS: Not supported for HE PPDUs (3)
.... .... ..11 .... = Max HE-MCS for 3 SS: Not supported for HE PPDUs (3)
.... .... 11.. .... = Max HE-MCS for 4 SS: Not supported for HE PPDUs (3)
.... ..11 .... .... = Max HE-MCS for 5 SS: Not supported for HE PPDUs (3)
.... 11.. .... .... = Max HE-MCS for 6 SS: Not supported for HE PPDUs (3)
..11 .... .... .... = Max HE-MCS for 7 SS: Not supported for HE PPDUs (3)
11.. .... .... .... = Max HE-MCS for 8 SS: Not supported for HE PPDUs (3)
Ext Tag: MU EDCA Parameter Set
Tag Number: Element ID Extension (255)
Ext Tag length: 13
Ext Tag Number: MU EDCA Parameter Set (38)
QoS Information (AP): 0x0b
.... 1011 = EDCA Parameter Set Update Count: 0xb
...0 .... = Q-Ack: APs MIB attribute dot11QAckOptionImplemented is false
..0. .... = Queue Request: AP cannot process a nonzero Queue Size subfield in the QoS Control field in QoS data frames
.0.. .... = TXOP Request: AP cannot process a nonzero TXOP Duration Requested subfield in the QoS Control field in QoS data frames
0... .... = More Data Ack: False
MUAC_BE Parameter Record
AIC/AIFSN: 0x03
.... 0011 = AIFSN: 3
...0 .... = Admission Control Mandatory: No
.00. .... = ACI: Best Effort (0)
0... .... = Reserved: 0
ECWmin/ECWmax: 0xa4
MU EDCA Timer: 0x28
MUAC_BK Parameter Record
AIC/AIFSN: 0x27
ECWmin/ECWmax: 0xa4
MU EDCA Timer: 0x28
MUAC_VI Parameter Record
AIC/AIFSN: 0x42
ECWmin/ECWmax: 0x73
MU EDCA Timer: 0x28
MUAC_VO Parameter Record
AIC/AIFSN: 0x62
ECWmin/ECWmax: 0x72
MU EDCA Timer: 0x28
Tag: RSN Information
Tag Number: RSN Information (48)
Tag length: 20
RSN Version: 1
Group Cipher Suite: 00:0f:ac (Ieee 802.11) AES (CCM)
Group Cipher Suite OUI: 00:0f:ac (Ieee 802.11)
Group Cipher Suite type: AES (CCM) (4)
Pairwise Cipher Suite Count: 1
Pairwise Cipher Suite List 00:0f:ac (Ieee 802.11) AES (CCM)
Pairwise Cipher Suite: 00:0f:ac (Ieee 802.11) AES (CCM)
Pairwise Cipher Suite OUI: 00:0f:ac (Ieee 802.11)
Pairwise Cipher Suite type: AES (CCM) (4)
Auth Key Management (AKM) Suite Count: 1
Auth Key Management (AKM) List 00:0f:ac (Ieee 802.11) PSK
RSN Capabilities: 0x0000
Tag: Vendor Specific: Microsoft Corp.: WMM/WME: Parameter Element
Tag: Vendor Specific: Cisco Meraki
Tag: Vendor Specific: Cisco Systems, Inc.: Aironet CCX version = 5
Tag: Vendor Specific: Cisco Systems, Inc.: Aironet Client MFP Disabled
Tag: Vendor Specific: Cisco Systems, Inc.: Aironet Unknown (11) (11)

12 Apr 2020

Upgrading from Cisco IOS XE 16.x.x in Install Mode

   Make sure switch is in install mode

Show Version

   Clean up space

request platform software package clean switch all file flash:

   Copy files

copy tftp://10.57.1.40/cat3k_caa-universalk9.16.09.05.SPA.bin flash:cat3k_caa-universalk9.16.09.05.SPA.bin

   Set boot variable

boot system flash:packages.conf

   Save

write memory

show boot system

   The output should display BOOT variable  = flash:packages.conf .

request platform software package install switch all file flash:cat3k_caa-universalk9.16.09.05.SPA.bin new auto-copy

   after installed do not need the original file

delete flash:cat3k_caa-universalk9.16.09.05.SPA.bin

reload

2 Apr 2020

Drag and Drop from Outlook to Xero

It is such a time waster copying files from outlook to desktop to then upload to cloud accounting system.

I have found this great tool called Outlook2Web

https://outlook2web.com/

Video of how it works

https://youtu.be/PLgRtzydj-w

Outlook2Web Features

Drag Attachments : You can drag attachments from Outlook to any website that supports HTML5 drag and drop.
Copy and Paste : Copy an attachment in Outlook and Paste it into HTML5 websites that support Copy and Paste of attachments.
Multi Attachment Support : You can select a bunch of attachments and drag them from Outlook to the web application all in one go.
Drag Emails and Outlook objects : You can drag email (.msg files) from Outlook directly into web applications.
Drag Attachments to Outlook : You can drag attachments from web applications to Outlook if the web app supports it (e.g. gmail).
Drag Emails as .eml files : You can configure Outlook2Web to drag emails as .eml as opposed to .msg files. Web apps can decode .eml files easily.
Drag Emails as .zip archives : You can configure Outlook2Web to drag emails as a .zip file contain the .eml message and all the attachments
Drag Calendar Events as .ics : You can configure Outlook2Web to drag calendar items as .ics files instead of proprietary .msg format
Drag Contacts as .vcf : You can configure Outlook2Web to drag contacts as .vcf files instead of proprietary .msg format